Set up TekLan VPN on Apple Vision Pro

Install TekLan VPN from the App Store

Apple lists the TekLan VPN iPhone and iPad app as compatible with Apple Vision. Use this route first for the simplest sign-in and connection experience.

1. Open the App Store on Apple Vision Pro and search for TekLan VPN.
2. Install the app published by MrChrissyServices LTD.
3. Open TekLan VPN and sign in with the email address and password for your client account.
4. Select a server, connect and allow visionOS to add the VPN configuration.
5. Confirm the app reports an active connection before closing it.

Manual configuration options

You can also create a dedicated OpenVPN or WireGuard profile in the Dashboard and import it into the corresponding client on Apple Vision Pro.

Use OpenVPN Connect on Apple Vision Pro

The Dashboard provides a dedicated Apple Vision Pro route using OpenVPN Connect.

Before you begin

• Connect Apple Vision Pro to the internet.
• Have your TekLan VPN client-account sign-in ready.
• Allow installation of the required VPN application and permission to save a configuration file.

Move the OpenVPN profile to the target device

• Download profile: save the .ovpn file directly.
• Email: select Send profile, choose Email and select Queue email. The .ovpn file is attached to the message sent to the client-account email address.
• Credentials: select Show OpenVPN credentials. Keep the displayed profile username and password available. The password unlocks the private key and is not the client-area password.

Complete the setup

1. Create an OpenVPN profile in the Dashboard.
2. Select Connect device and choose Apple Vision Pro.
3. Install OpenVPN Connect from the App Store on Apple Vision Pro.
4. Download the .ovpn file from the Dashboard in Safari.
5. Open the downloaded file and share it to OpenVPN Connect. Alternatively, use Menu, My Profiles, add icon, Upload File in OpenVPN Connect.
6. Confirm the Import Profile prompt.
7. If asked for the private-key password, enter the OpenVPN password shown for the profile.
8. Turn on the imported profile and allow visionOS to add the VPN configuration.

Check the connection

1. Confirm the VPN application or tunnel reports Connected.
2. Check that the operating system VPN indicator appears where supported.
3. Confirm the public IP address changes using a browser or appropriate network check.
4. Disconnect the tunnel and confirm normal internet access returns.

If it does not connect

• Disconnect any other VPN application or tunnel that could conflict with TekLan VPN.
• Import a newly generated profile if the saved profile has been replaced or revoked.
• Check the exact error shown by the VPN application before contacting support.

Import WireGuard on Apple Vision Pro

The Dashboard also provides a WireGuard route for Apple Vision Pro.

Before you begin

• Install WireGuard from the App Store.
• Create a separate WireGuard profile for this device.

Move the WireGuard profile to the target device

• Download profile: save the .conf file directly.
• Email: select Send profile, choose Email and select Queue email. The .conf file is attached to the message sent to the client-account email address.
• Device access code: select Send profile, then Get code. On the target device, open dash.teklanvpn.com/get, enter the code and select Download profile. The code expires after 15 minutes, works once and is replaced if another code is generated.

Import and connect

1. Obtain the .conf file using one of the delivery methods above.
2. Open WireGuard, choose the add button, use the file import option and select the .conf file from Files or Downloads.
3. Activate the tunnel and approve the operating-system VPN permission when prompted.
4. Confirm the tunnel reports an active connection and that the public IP address changes.